Duravent DuraChimney II Manuale Utente

DuraChimney iiAir-Cooled, All-Fuel Chimneyfor FireplacesInstallation Instructions

10enclose the attic portion of the chimney in a framed enclosure (always maintain 2” air-space clearance to combustibles). If the chimney is fully enc

11Dotted line represents sample problem. Example shows replace opening as 36" wide and 30

12member and secure in place with screws or nails. For chase enclosures, use a Chase Top Flashing. The Chase Top Flashing allows

13Figure 17installed 1” off the Chase Top Flashing to provide proper ventilation (Fig. 15). Tighten the bolts of the Storm Collar and seal the Storm C

14Elbow Angle From Vertical Chimney Length Between Elbows  

15appropriate length (or lengths) of Chimney Section(s) above the Elbow. Attach the second Elbow above the Chimney Section to complete the offset (Fi

M&G DURAVENT WARRANTYM&G DuraVent, Inc. (“DuraVent”) provides this limited lifetime warranty for all of its products to the original purchaser



3

4DuraChimney is designed to stay cool on the outside, to provide a hot draft on the inside, and to provide for a re-safe design that protects both th

5Drill / DriverHammer Caulking GunPlumb Bob Screwdrivers (Phillips & Standard)Tin Snips Saber or Keyhole SawLevel De

6 10"12"14"16"pass through oors

7according to the replace manufacturer’s installation instructions. The ue outlet should be placed between the rafters or joists above, if possible

8tension is needed to prevent the damper plate from rattling when closed. Mount the Lintel Hook to the masonry with the screws provided.

9installed on the underside of the ceiling/oor framing (Fig. 5). Use a minimum of either (1) 8 penny nail or (1) 1-1/4” wood screws per corner. 